heavy-duty slurry pump
Due to its high wear resistance and a high degree of adaptability, the Schegler Verido series withstands the most demanding slurry applications and highest industry requirements.
Schegler designed its Verido vertical cantilevered slurry pump to handle abrasive and corrosive liquids and slurries while being submerged in sumps or pits. Its cantilever design avoids submerged bearings or a shaft seal, which ensures minimum maintenance and eliminates the need for external flushing water. Its design makes the Verido suited for continuous use in applications that require greater reliability and durability than other vertical pumps or submersible pumps can provide.
The Verido pump range is available in various lengths to cover most standard sump depths. In addition, this series offers a wide range of configuration options, which allow the pump to be tailored to a specific application. Wet-end components are available in a variety of alloys and elastomers, allowing your Schegler distributor to select the optimal combination of materials for maximum wear resistance in your application.
Heavy-duty cantilevered shaft design
Its cantilever design avoids submerged bearings or a shaft seal, which ensures minimum maintenance and downtime, and eliminates the need for external flushing water.
Various material configurations for wet-end parts
Wet-end parts are available in a wide range of alloys and elastomers. It allows the pump to be tailored to your specific application, resulting in best-in-class wear resistance.
Different impeller shapings
The impellers are designed with large clearances to pass solid particles efficiently and reduce the risk of blockages while maintaining high performance. The high-efficiency back vanes further reduce axial loads. Different shapings are available to tackle a myriad of applications.
The self-venting double suction design eliminates the need for priming and makes the Verido well-suited for snore conditions.
Cast bearing housing
Cast bearing housings result in lower vibration levels, allowing for improved critical speeds.
Various column lengths
Each pump size is available in various column lengths to cover most standard sump depths.
Extra heavy-duty roller bearings
The reliable grease-lubricated extra heavy-duty bearings are designed to contain the radial forces exerted by the system, thus reducing shaft deflection to a bare minimum. The combination of a labyrinth seal and flinger provides a unique barrier preventing contaminants’ ingress, further improving maintenance intervals.
Verido’s concentric casing design drastically reduces shaft load and reduces wear.
An optional agitator can be installed. This agitator helps lift settled solids, improving suction conditions.
Optional suction pipe extension
An optional suction pipe extension can be installed to pump deep sumps and pits.
The curves above show pump performance with clean water.
The curves should only be used to make a primary selection. Ask your Schegler distributor for detailed specification sheets per model.
Discharge sizes 40 to 250mm (1.5″ to 10″)
Capacity up to 1135m³/h
Total head up to 50m
- Cantilevered design avoids submerged bearings
- No sealing system necessary
- Replaceable wet-end parts
- Wet-end parts available in various metals and elastomers
Your local Schegler distributor is happy to provide specification sheets for bigger sized pumps or a specific pump configuration.
Due to its high wear resistance and a high degree of adaptability, the Schegler Vigor series withstands the most demanding slurry applications and highest industry requirements.
This horizontal slurry pump is designed for applications where abrasive or corrosive liquids with particles must be pumped. Fluids can range from wastewater to abrasive slurries.